產品簡介：

    制冷劑按過濾器上箭頭所指示的方向流動時，旁通益流閥起作用。如果流過元件時產生過大的工作壓力降，則旁通益流閥稍微開啟，以保持足夠的氣流并使全封閉壓縮機馬達得到適當?shù)睦鋮s。當吸氣過濾安裝方向與箭頭所指的方向相反時，旁通益流閥不起作用，不管壓力降多大，它都不會開啟，這時需接一只檢修閥，以便測量經過濾芯至壓縮機吸氣輔助閥的壓力降。如果吸氣過濾器的旁通益流特征不起作用，就可用此檢修閥作壓力測量。

        When the refrigerants flow in the direction of arrow printed on filter,the bypass valve is starting-up.When great pressure descent appears because liquid flow across the components,the bypass valve shouleslightly open to keep enough gas current and make the herme tic motor of compressor quitecool.When the refrigerants flow in the anti-direction of arrow felt on fliter,thebypass valve is not in use no matter how great the pressure descent is .At hat time a examine valve is must be installed to determine the degree of pressure descent from core(block) to vice-valve.The letter T indicates that the filter is installed with examine valve.Ifthe bypass relief feature is not active,the examination valve can measure the pressure.

性能特點：

• 防止污物進入壓縮機
• 如果過濾器堵塞，溢流閥會開啟
• 防腐漆保證500小時鹽霧噴淋試驗
• 全流量時壓力降小
• 最大工作壓力：3.5Mpa
• Protects the compressor from dirt.
• The bypass valve opens when the fliter blocked.
• Anticorrosive powder painting can suffer 500 hours salty spray test.
• Pressure reducing when at full flow rate.
• Maximum working pressure:3.5Mpa.