斐卓Feizhuo_廣角實心噴嘴系列G-W/H-WSQ系列

G-W和H-WSQ系列噴嘴的特點是能產生實心錐形的噴霧形狀，噴射覆蓋區域呈圓形（方形），噴流角度為120°-125°（93°-115°）。

此類實心噴嘴在整個噴流區域內噴出均勻噴霧，液滴大小中等至偏大。在需要徹底覆蓋一些區域的噴流應用領域能產生極佳的效果；

這種噴霧的均勻來源于獨特的葉片設計和精準的內部尺寸，保證勒準確，穩定的產品性能。

G - W and H - series nozzle is the feature of WSQ can produce solid conical spray shape and regional jet assumes the circular (square), the jet Angle is 120 ° to 125 °, 93 °, 115 °).

Such solid in the whole flow area nozzle spray equably, droplet size medium to large.In some need a thorough coverage area of the spray flow field can produce great effect;

This kind of spray evenly from the unique blade design and precise internal size, ensure accurate, stable product performance.

空氣霧化噴嘴壓力傳送式噴霧裝置（外混式）

霧化噴嘴有點和特性：

通過外部混合裝置，無需改變液體流量，只需改變空氣壓力，即可對霧化進行控制。

對于扇形噴霧，尺寸A，B,和C是距離噴嘴相應距離處的噴霧角度；

Through the external mixing device, without changing the liquid flow, only need to change the air pressure, can to control the atomization.

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray Angle;

The spray from the nozzle to the maximum dispersion point projection a total distance of D;

When using pressure conveying liquid system, liquid by pressure was taken to the nozzle;

Liquid and compressed air or other gas is mixed in the outside, to produce fully atomized spray;

斐卓造雪機噴嘴

一、霧化效果明顯；

二、覆蓋面積可以小范圍調整，噴頭達到霧化的時候出水很細，霧化效果很好；調成0度時是直線水柱狀

三、水壓要求比較低，一般自來水壓力即可噴；

四、安裝方便、節水性能好!

噴嘴技術參數：

連接尺寸：G1/4 (備選M14*1)

工作壓力：2-4公斤

噴水直徑：0.5-2米（具體根據水壓而定）

噴頭流量：0.1-0.5立方米每小時