GRINNELL VALVES 格林奈爾蝶閥，格林奈爾閥門，1000系列，8000系列，WC-8100，GHP系列GRINNELL VALVES 格林奈爾蝶閥(現貨）
GRINNELL VALVES 格林奈爾蝶閥(現貨）
的詳細介紹
GRINNELL VALVES 格林奈爾蝶閥 GRINNELL VALVES 格林奈爾蝶閥(現貨）
主要包括1000，8000，GHP三大系列
歡迎來到Grinnell閥門
公司Grinnell格林奈爾是工業、商業和建筑市場閥門的領先制造商。
Grinnell格林奈爾閥門采用最先進的加工設備生產。每個閥門在出廠前都經過110%的打壓測試，確保每一個閥門的安全可靠。
現貨供應GIRNNELL VALVES 美國格林奈爾光桿蝶閥，氣動蝶閥，現貨口徑有：DN80mm,DN100mm,DN150mm等規格。
型號為：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150
| |
Series 1000 Resilient Seated Butterfly Valves
|
 |
|
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.
STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.
SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.
|
|
PDF
