-體積小，重量輕
-安裝,拆卸及操作簡易
-方便的手動操作,電動,氣動和液壓自動化操作
-可自動清潔,無需維護
-完全密封,最大程度保壓
-單件閥桿,不用插銷.
The separation between the flanges should allow free access to the valve with the disk half closed,so the rim is protected and the interference of the elastic rings is reduced during the installation,and the initial value when opening.
法蘭之間的空隙應當允許閥板半關閉狀態的閥門進入,這樣 在安裝過程中及初次打開閥門的時候閥座邊緣將被保護著并且密封圈內側將縮小.
After aligning the valve with the tube flanges,and before tightening the bolts,the disk should be turned until it is completely open.lf it were closed it would twist the ring,so it would expand round the edge of the disk,which woukd create an excessively high torque in the initial opening:it coukd tear or be twisted out of shape permanently.
在調整好閥門與管道法蘭的位置后及旋緊螺栓之前,閥板應置于完全打開位置.如果閥板處于關閉狀態,密封圈可能被扭曲,擠壓膨脹并包住閥板邊緣,在初次打開造成極大的力矩.閥座可能因此被撕扯.扭曲造成永久性的損害.
Las bridas insuficientemente separadas pueden deteriorar el anillo elastico.if the flanges are not sufficiently separated they could damage the elsdtic ring.
在安裝蹀閥時,如果法蘭未能給予蹀閥充分的空間將會損壞密封圈.
雙偏心閥門的金屬密封在高溫環境下比橡膠封圈密閉性更好.
工作壓力：≤25BAR
法蘭連接：DIN2501-PN10/16/25-ANSI 150 LBS
設計標準：EN593
GB/T 12238
公稱直徑：DN65-DN300
應用范圍：石油、化工、食品、醫藥、能源等
適用溫度：-79℃至180℃(可因材料不同而變化)
結構長度：GB/T 12221 J3系列
ISO 5752 Short，series 16
BS5155 Wafer Short∕Medium
DIN 3202 Part3，series K3
頂端法蘭：ISO 5211
閥體材質：碳鋼、不銹鋼
閥板材質：碳鋼、不銹鋼
閥桿材質：不銹鋼
閥座材質：PTFE
傳動方式：手動、蝸動、電動、
氣動、液動、電液聯動等
泄漏等級：PATEA EN 12266-2(零泄漏﹚
